With this DIY fashion clutch, you can become your very own fashion designer by creating this gorgeous, uniquely-styled clutch that stands out from the rest. Everyone at the Christmas party will be asking you, "Where did you get that clutch?"..
Find out how to make yours below!
Tools and Materials
- Decorative fabric for outside of clutch
- Fabric for lining
- Heavyweight fusible stabilizer
- Fusible fleece
- Rotary cutter
- Grid ruler
- Iron
- Sewing machine
- Coordinating machine-sewing thread
- Transparent tape
- Bond 527 Multi-Purpose Cement
- Metal clutch frame hardware
1. Cut 13-by-13 1/2-inch pieces from outer fabric, lining fabric, and heavyweight fusible stabilizer. Cut a 10 1/2-by-13-inch piece of fusible fleece. With an iron, fuse heavyweight stabilizer to wrong side of outer fabric, then fuse fleece to center of stabilized side of fabric.
2. With right sides of outer and lining fabrics together, sew 1/2-inch seams along both longer 13 1/2-inch edges.
3. Turn sewn pieces so right sides are facing out, and press seams flat.
4. Fold in half, matching seams at top, with lining on inside. Sew a 1/4-inch seam on outside raw edges, then trim seam allowances to 1/8 inch and snip in at the corners. Turn again, so outside fabric is on the inside. Sew 1/4-inch seam along edges, creating a finished French seam, then turn right side out.
5. Fold corners down; mark and sew a 2-inch gusset on each. Trim corner to 1/8 inch. Turn again so lining faces out; sew a 1/4-inch seam along gussets to finish seams. Turn right side out one last time.
6. Apply a bead of fabric glue to metal frame. Center over top seam, carefully insert fabric in metal frame, and secure in place with tape. Allow glue to set for several hours.
7. Remove tape, tuck outside corners behind frame, and snap closed.
Pssst..Want to add your own personal label? Check out how to below:
Tools and Materials
- Computer with program for designing labels
- Inkjet printer
- Jacquard Inkjet printable silk
- Iron
- Steam-a-Seam double-sided fusible interfacing
- Scissors or rotary cutter
1. Create labels in an 8 1/2-by-11-inch document using any program that generates images, words, letters, etc.
2. With an inkjet printer, print document on silk side of printable silk page. Let ink set for 15 minutes.
3. Carefully peel off paper backing from silk and discard. Place sheet on flat surface and gently reshape. Apply Steam-a-Seam double-sided fusible interfacing to wrong side of silk with a warm iron.
4. Cut labels from sheet. Peel off paper backing, and iron labels in place on handmade items.
Now when people ask you, "Where did you get that bag?" , you can tell them!
Go ahead now and try this cutesy, bold clutch!
Courtesy of MarthaStewart.com
No comments:
Post a Comment